佳能BJC－1000SP打印机多年未用，跟换墨盒后出现错误代号5000
Service error 5000.
Cancel printing and turn the printer off and then back on.
If this doesn't clear the error, see the printer manual for more detail.
小车不动，且只在头几行打印一点
200分没人要啊？那我就丢掉啦？
lx的我都在网上找过试了，没用。
有2种可能:1你换上的墨盒有可能不是原厂的东西.2.你的打印机长时间不用.内部用氧化层了.导致对墨盒的检测失效.最好找你的打印机品牌售后清理或维修.
温馨提示：内容为网友见解，仅供参考
第1个回答 2010-04-09
你好：
先用油润滑下小车的活动杆。然后用打印机驱动清洗打印头，应该可以解决。按住清除键15秒左右试下。
先用油润滑下小车的活动杆。然后用打印机驱动清洗打印头，应该可以解决。按住清除键15秒左右试下。
第2个回答 2010-04-08
多半是墨盒的原因。或者说打印头的原因。喷墨的多年未用，绝大多数是不能用了。
第3个回答 2010-04-08
主要你要佳能原装墨盒才可以解决这个问题，再不行找佳能打印机售后清理或维修.
第4个回答 2010-04-08
Hello there Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.
First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.
If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
加润滑油本回答被网友采纳
First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.
If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.
And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
加润滑油本回答被网友采纳
相似回答
